Quickstart Guides

Browse Our Help Center

To use our apps and setups, make sure you have an active SaferVPN account

Manual PPTP Setup for Huawei router

Updated on: 2018-04-17 10:14:37 UTC

In order to setup PPTP connection on your Huawei Router, follow our step by step guide detailed below:

Login to your Router Administrator Console

  1. Connect to the internet and launch the web browser on your computer.
  2. You need to know your router’s local IP address to access the administrator login page.
  3. In most cases, the local IP address is 192.168.1.1 or 192.168.0.1; however, we do have a comprehensive list handy. You can find it here.
  4. On the login page, you are prompted to enter the Router’s username and password.

Configure the PPTP Connection

  1. Go into your routers administration panel.
  2. Open VPNin the left-side menu, and expand the PPTP section.
  3. Enter this configuration:

    Enable PPTP LAC:Checked
    LNS address: Enter a SaferVPN server address. You can find our server addresses here
    Host name: Anything you want, for ex:- SaferVPN or SaferVPN PPTP etc.
    Tunnel password: Leave empty
    Hello Interval (seconds): 60
    PPP username: SaferVPN Username
    PPP password: SaferVPN Password
    Connection mode: Auto

    PPTP_-_Copy.jpg

  4. Click Save

Need help installing our VPN on another device? Check out our: VPN for WindowsVPN for MACVPN for iOSVPN for AndroidVPN Router, and our VPN Chrome Extension.

 

Get SaferVPN Now
Have more questions? Submit a request
Go to top«