To use our apps and setups, make sure you have an active SaferVPN account

Manual L2TP Setup for Huawei router

Updated on: 2017-08-31 12:09:54 UTC


Our VPN for routers immediately protects your internet privacy and security while giving you full internet freedom and instant access to content streaming

Connect every device in your entire home or office with a Plug & Play SaferVPN Router.

Before setup, make sure you have:

  • A working Internet Connection.
  • A Huawei Router that supports PPTP.
  • An active SaferVPN subscription.

In order to setup L2TP connection on your Huawei Router, follow our step by step guide detailed below:

Login to your Router Administrator Console

  1. Connect to the internet and launch the web browser on your computer.
  2. You need to know your router’s local IP address to access the administrator login page.
  3. In most cases, the local IP address is or; however, we do have a comprehensive list handy. You can find it here.
  4. On the login page, you are prompted to enter the Router’s username and password.

Configure the L2TP Connection

  1. Go into your routers administration panel.
  2. Open VPN in the left-side menu, and expand the L2TP section.
  3. Enter this configuration:

    Enable L2TP LAC: Checked
    LNS address: Enter a SaferVPN server address. You can find our server addresses here
    Host name: Anything you want, for ex:- SaferVPN or SaferVPN L2TP etc.
    Tunnel password: Leave empty
    Hello Interval (seconds): 60
    PPP username: SaferVPN username
    PPP password: SaferVPN password
    Connection mode: Auto


  4. Click Save

Need help installing our VPN on another device? Check out our: VPN for WindowsVPN for MACVPN for iOSVPN for AndroidVPN Router, and our VPN Chrome Extension.

Have more questions? Submit a request