To use our apps and setups, make sure you have an active SaferVPN account

Manual L2TP setup on Padavan Router

Updated on: 2017-08-13 08:34:15 UTC

Introduction

Our VPN for Routers immediately protects your internet privacy and security while giving you full internet freedom and instant access to content streaming.

Connect every device in your entire home or office with a Plug & Play SaferVPN Router.

To manually set up L2TP protocol on a Padavan Router, follow our step by step guide detailed below:

Setup 

  1. Login to your Padavan control panel. To do so, type http://192.168.1.1/ in your browser and log in with your router username and password. 
  2. Click the VPN Server tab on the left menu and then click on VPN Client tab in the top menu bar. 
  3. Click Add a profile to create a new VPN profile. 
  4. Edit the setting fields as follows:

    Enable VPN Server: Enabled

    VPN Server Protocol: L2TP
    MPPE Encryption: MPPE 128
    Broadcast Traffic: Disabled
    VPN Client IP Pool: 192.168.1.251-192.168.1.254
    Username: Your SaferVPN Username (email)
    Password: Your SaferVPN Password
    Auto-reconnection (if available): Yes
    VPN Server: Enter one of the hostnames listed here per you needs
  5. Click Apply. 

    padavan_l2tp.png

  6. Now that you've created a profile, you can establish your SaferVPN connection.

Need help installing our VPN on another device? Check out our: VPN for WindowsVPN for MACVPN for iOSVPN for AndroidVPN Router, and our VPN Chrome Extension.

GET SAFERVPN NOW Go to top
Have more questions? Submit a request