To use our apps and setups, make sure you have an active SaferVPN account

Manual L2TP Setup for Singtel Router

Updated on: 2017-07-09 13:16:28 UTC

Introduction

Our VPN for routers immediately protects your internet privacy and security while giving you full internet freedom and instant access to content streaming.

Connect every device in your entire home or office with a Plug & Play SaferVPN Router.

Before you begin, make sure you have:

  • A working Internet Connection.
  • Singtel Router that supports L2TP.
  • The SaferVPN app installed on your device.

In order to setup an L2TP connection on your Singtel router, follow our step by step guide detailed below:

Access Router

  1. Login to your router’s Control Panel. Type http://192.168.1.254/ in your browser.
  2. Now Enter your Singtel router’s Username and Password.

Configure the L2TP Connection

Select the following options:

original-vpn2.png20170524-25279-11kg2mt.png

  1. Go to the VPN Settings and click on VPN Client.
  2. Select L2TP from the VPN Client drop-down, click on Apply.
  3. Server Address: Use one of our server names from this list, click here.
  4. Username: SaferVPN Username
  5. Password: SaferVPN Password
  6. MPPE Encryption: MPPE-128
  7. Click on Apply
  8. Now Click on the VPN Server
  9. VPN Server Type: L2TP Server
  10. L2TP Server Status: Enabled
  11. Enter SaferVPN Username and Password if required and click Add.
  12. In Advanced Settings, fill in the following details:

    original-vpn5.png20170524-25279-wsnhui.png


    MS-CHAPv1/2: Enable
    Connect to DNS Server Automatically: Enable
    Connect to WINS Server Automatically: Enable
    MRU: 1480
    MTU: 1480
    Client Start IP Address: 192.168.10.2
    Client End IP Address: 192.168.10.11

  13. Select Apply.

Need help installing our VPN on another device? Check out our: VPN for Windows, VPN for MAC, VPN for iOS, VPN for Android, VPN Router, and our VPN Chrome Extension.

GET SAFERVPN NOW Go to top
Have more questions? Submit a request