To use our apps and setups, make sure you have an active SaferVPN account

Manual PPTP Setup on Tenda Router

Updated on: 2017-07-09 13:20:00 UTC

Introduction

Our VPN for routers immediately protects your internet privacy and security while giving you full internet freedom and instant access to content streaming.

Connect every device in your entire home or office with a Plug & Play SaferVPN Router.

Before installing, make sure you have:

  • A working Internet Connection.
  • Tenda Router that supports PPTP.
  • A SaferVPN active subscription.

In order to setup PPTP connection on your Tenda router, follow our step by step guide detailed below:

Configure the PPTP Connection

  1. Login to the router’s web page.
  2. Select Advanced Settings.

    tenda.png

  3. Choose WAN Settings to configure the WAN port.
  4. To set up the PPTP connection, follow the steps below:


     tenda2.png

  1. PPTP Server address: Enter any of the server IPs you wish to connect to, click here.
  2. Username: Enter your SaferVPN Username.
  3. Password: Enter your SaferVPN Password.
  4. MTU: 1452.
  5. Address Mode: Choose Dynamic from the drop-down menu.
  6. Leave the next three options as 0.0.0.0
  7. MPPE option: To be enabled, but you may be able to make a connection with this option disabled, so try out both ways.
  8. Click OK.

Need help installing our VPN on another device? Check out our: VPN for Windows, VPN for MAC, VPN for iOS, VPN for Android, VPN Router, and our VPN Chrome Extension.

 

GET SAFERVPN NOW Go to top
Have more questions? Submit a request